| MODEL RLX - LOUVERED PENTHOUSE
 |
PDF con características
técnicas del producto.
Tamaño: 644 KB |
MODEL RCXII
MODEL BGH
MODEL RLX
|
Application
Model RLX aluminum louvered penthouse provides a low
silhouette and modern design for fresh air intake, pressure
relief and gravity applicants. With hundreds of optional lengths
and heights available, the RLX is frequently used for enclosing
unsightly rooftop equipment. The storm resistant aluminum
louver design provides weather integrity when properly sized.
Catalog capacity ranges from 395 to 69,500 CFM with much
greater ranges available in custom sizes. Companion, louvered
fan Model LSF offers continuity in rooftop equipment designs.
Construction/Specification Checklist
• All aluminum construction for weather resistance, long life and maintenance-free operation.
• Louvers are made from heavy-gauge aluminum.
• Corners are miter cut and heliarch welded for strength and weather protection.
• Cross-braced with heavy-gauge angle for strength and wind resistance.
• Top is cross-broken and rated to 30 pounds per square foot for snow load protection.
• 1/2" x 1" galvanized birdscreen. (Deleted when filters used). |
Shipping
• Units with width of 84" and smaller are shipped assembled.
Units with a width of 90" and larger are shipped in two pieces for field assembly, (Ex: 84 x 144 ships assembled 90 x 90 ships in 2 pieces)
• Knockdown units assemble with standard tools. Easy installation directions and fasteners are included.
Options/Accessories
Roof Curb: Prefabricated heavy-gauge galvanized steel, welded construction, 8" high (other heights are also available) with 1-1/2" wood nailer. Assures perfect fit of ventilator to
roof opening. Options include burglar bars, single or double pitch construction and hinged curbs for easy duct access.
Motor Operated Damper: Motor operated aluminum damper for positive closure against backdraft.
Automatic Damper: Automatic aluminum damper for ease in installation and effective backdraft protection.
Special Coatings: Epoxy, Heresite and Eisenheiss area available when special coatings are required.
Insulation: Roof tar is added to underside of top to help prevent condensation.
Filters: Permanent type aluminum mesh filters attached to full perimeter of hood. Installed for easy cleaning. On air intake, add .15" to static pressure listed in the tables.
Insect/Weather Screen: Helps prevent insects and snow (in extreme conditions) from entering units. Add .10% to the static pressure tables for exhaust models and .05" for intake ventilators.
Access Section: Used for easier access when unit is used as an equipment cover. |
