 |
PDF con características
técnicas del producto.
Ver: Página 38
Tamaño: 2.71 MB |
|
• Compatible with Active Strain gauge, 600, 622 and 655 Barocels
• Clear 4 digit display with choice of pressure unit
• Auto ranging facility when used with Barocels
• Bench top or panel mounting to DIN 43200 standard
• Option with two 3A changeover relays for set-point process control
A single Active Strain Gauge or Barocel 600, 622 or 655 capacitance manometer can be |
connected using appropriate adaptor cable and a standard Active gauge cable. Units of pressure display can be selected independent of gauge full scale units. Auto range features for Barocels gives 4 decade display. Relay version gives one falling pressure set-point with adjustable hysteresis
and one rising pressure set-point with fixed hysteresis.
|
|
PDF con características
técnicas del producto.
Ver: Página 39
Tamaño: 2.71 MB |
|
The Model 1575 Pressure Display is a low cost, microprocessor based, digital display and set-point controller for the Barocel 600, 622 and 655 capacitance manometers. The Model 1575 incorporates power supply, digital display, four user-selectable set points, along with analog and optional RS232 outputs in a compact 1/8 DIN package.
Features & benefits
• Push button or remote zero adjustment
- To adjust the transducer zero, simply press the front panel membrane switch. Alternatively, earth (ground) a rear panel connection.
• Push button full scale calibration
- Use the full scale calibration feature if you want to display engineering units which are different from the transducer calibration, or to incorporate arbitrary coefficients for the transducer.
|
• User selectable set-points with open collector contacts
- There are four user programmable solid-state, open collector setpoints; two high and two low. The hysteresis band associated with each set-point can also be adjusted to meet system requirements.
• Easy to read LED display
- The 10 mm bright red, high efficiency LED display is easily visible from normal viewing angles and in most lighting conditions.
• Optional RS232 output
- An RS232 port is available, at minimal cost, for digital pressure output. |
