 |
AV5A MANUAL OPERATION AIR ADMIT VALVE
The AV5A is manufactured in aluminum alloy. It has a control knob attached to a screw-actuated plunger: turn the control knob clockwise to close the valve. A nitrile ‘O’ ring seals the plunger to the valve body.
The valve can be connected directly, pipeline supported or panel mounted, and is connected to the vacuum system with the BOC Edwards SC5 coupling (supplied). |
 |
PDF con características
técnicas del producto.
Ver: Página 26
Tamaño: 2.04 MB |
|
 |
AV10K MANUAL OPERATION AIR ADMIT VALVE
The AV10K is manufactured in aluminum alloy. It has a control knob attached to a screw-actuated plunger: turn the control knob clockwise to close the valve. A nitrile ‘O’ ring seals the plunger to the valve body.
The valve can be pipeline supported only, and is connected to the vacuum system with an NW10 fitting. |
|
PDF con características
técnicas del producto.
Ver: Página 26
Tamaño: 2.04 MB |
|
 |
IPVA10EK SOLENOID OPERATION AIR
ADMITTANCE VALVE
The IPVA10EK is a solenoid operated valve designed for automatic admittance of air or vent gas into a vacuum system. The valve has two ports with NW flanges. One of the valve ports is connected to the vacuum system,
the other port can be left open to atmosphere or connected to a vent gas supply. The vacuum system is isolated from atmosphere (or the vent gas supply) by a fluoroelastomer pad on the base of the valve plunger, which seals against the body of the valve. Normally open and normally closed versions of the valve suitable for use with different electrical supplies are available to suit your application.
|
|
PDF con características
técnicas del producto.
Ver: Página 27
Tamaño: 2.04 MB |
|
